Alarm communicators New Zealand

Professionally monitored services / Alarm communicators NZ / PM 35

PM 35

IP Only Communicator

The Permaconn solution provides a constant secure link between the supervised premises and the Central Station.

The PM35 is a versatile alarm communicator that reports on IP to the Central Station.

This unit can interface with a range of alarm panels using Contact ID. Alarm messages are sent using the clients ISP and are received by any Central Station that has the Permaconn solution installed.

Key Features

  • Remote alarm panel Upload/Download available using IP
  • Plug & Play IP alarm communicator
  • Compatible with NBN and Naked DSL serivces
  • 3 input + 3 output, function control using Atlas and/or Pocket Secure
  • Interfaces with any Contact ID alarm panel

Additional Features

  • Small size - Fits inside alarm panel enclosure
  • AES128 encryption for alarm data – Secure transmissions over public internet
  • High speed RS232 Interface – Future development
  • Internal watchdog reset function – No unnecessary service call-outs
  • PM35 acquires an IP address automatically using the customers DHCP service – No IT hassle
  • Various diagnostic LEDs – Easy installation
  • Activate, commission and diagnose using Atlas – Seamless installation process
  • Monitors & reports dialler interface lead status – Panel dialler to Permaconn interface secure
  • Operates on 8 – 15V DC with low current draw – Easily powered directly from alarm panel
  • Outputs can be configured to arm/disarm alarm system, control gates and lights. ‘Pocket Secure’ smartphone app controls these functions.


Housing Material:
ABS plastic - white
110mm (h) x 25mm (d) x 80mm (w)
Operating Enviornment:
0°- 50°C @15% to 85% humidity (non-condensing)
8 - 15V DC. Terminal or plug pack socket available. Plug pack must have approval
Power Consumption:
0.15A @13.8V DC
Communcation Protocol:
Ethernet (10/100BASE-T)
Serial Port:
High Speed RS232 interface
Auxiliary Input:
3 x 24Hr input - state change detected every second. EOL 3.3K
Auxiliary Output:
3 x Open collector output @50mA (max) Function control using Atlas web portal and/or ‘Pocket Secure’
Static IP Network Configuration:
Ethernet interface using ‘IpSetup’ program
Data Security:
AES Encryption
Supported Modulation:
BELL-103, ITU-V21/V22/V22B
EN301489, EN301908, EN62311, EN60950-1